DIY Filter Test

Today, i managed to made DIY filter and it working perfectly.

 

Beside this is my mini filter that i had made with Man Hu. everything look perfect and same go with the water flow.



I going to run for 24 hour to check whether any leaking and failure.

READMORE

DIY : Canister Filter

Hey guy, i manage to find a nice guideline to create a DIY Canister Filter. Below is the step 

good trying!!!


 

we cut 30cm of pvc tube. we make a hole for the water entrance and a semicircular hole on the bottom lid.


then, we make a hole for the water exit on the top lid and placed the screw tubes with seals.



we glue the pvc pieces, cleaning them well and sanding them lightly.



then we make a hole for the compression gland.



for the baskets, we cut the bases of the pvc screens. then from the rest of the pvc pipe we cut three 6cm pieces, making them a bit smaller to fit inside the canister. then glue the pieces.



we glue the pump to the top lid and adapted the water exit from the pump to the other 1/2 pipe with a little piece of hose.



we put the compression gland and let dry for 24 hours.



we cut the filtering material to fit the baskets. sponge, fiber and biceramic.


we put the baskets inside the canister. first the sponge, then fiber, then bioceramic. and top it of with a single pvc screen to prevent things from getting sucked by the pump.




we connect the hoses to the valves using the adaptors. the valve in the water entrance is permanent and is used for keeping the water from spilling when servicing the filter. same thing with the other valves, we shut them and can leave the hoses in the aquarium



we do a 24 hour hermeticity test.



we put the in and outflow pipes in the aquarium (note the horrible filter that used to be in that tank).



and there it is. two weeks after installation. working like a charm.

READMORE